What material is good for cupboard doors? What is the difference between covering film and blister film?

In the market, you can usually see cabinet door panel materials with various styles, patterns and patterns. Generally, most of the effects of these different colors and patterns are achieved through the process of coating film and blister film. So, what material is best to use for cabinet doors? The following mainly talks about the differences between coating film and blister film as well as their advantages and disadvantages for your reference when selecting materials.

The differences between coating film and blister film are as follows:

1. Different thickness

The blister and coating processes basically use density board as the base material, on which different processes are used to cover patterns and patterns. The thickness of the blister film is usually thicker than the coating film.

2. Different coverage

The coverage of the blister mold is generally 5 sides, and the covering film is generally 6 sides.

3. Different shaping methods

In the blister process, the shape is made from one piece, the high-temperature softening film is then bonded, and the covering shape is superimposed through grooves, using a cold process.

4. The difference between edge sealing or not

The blister process usually has no edge sealing, while the coating process has edge sealing.

Advantages and disadvantages of coating film and blister film:

The coating process is more complex than the blister process and is an upgrade of the lamination process. The blister process has relatively few steps and the cost is much cheaper. If the product quality is not handled well, bubbles will easily appear on the board. deformation situation.

Although the thickness of the coating film is a little thinner, due to the fact that all six sides are covered in the process, firstly, it can better protect the base material; secondly, it can effectively prevent the adhesive components in the base material from dispersing. For the sake of environmental protection; thirdly, the six sides of the fully-coated film can enhance the load-bearing capacity of the board, making it less likely to deform and crack; and fourthly, the recessed connection method increases the possibility of mixing and matching door panel colors and materials, which can provide a richer style. Door panel selection.

To evaluate the quality of door panels based on the difference between door panel blister and cladding processes, the first thing to look at is whether the overall color is uniform and the surface flatness is free of air bubbles and air infiltration. The second factor is the door panel's high temperature, waterproof, and moisture-proof ability to resist scratches. Whether the performance is good or not depends on the pressure-bearing capacity of the door panel base material and its ability to resist deformation. Generally speaking, the coating process can control the quality of the door panel better than blister products.